How to Correctly Apply Web Spray Adhesives

If you seek a finish that’s guaranteed to last, you must first understand how to correctly apply web spray adhesive ...

Like most things in life, however, practice is required to get it spot on.

Our handy step-by-step guide, below, will help you get the most from your TensorGrip® products, ensuring you achieve the perfect finish every time.

Step 1

Hold the gun at 90° to surface, around 75-100mm from the substrate.

Step 2

Apply a prime coat to absorbent substrates and wait for 10 seconds to flash off.

Step 3

Apply adhesive to the perimeter edges of the substrate.

Step 4

Move faster and spray at 75 to 100 per cent overlaps.

Step 5

Wait for 2-3 minutes until the adhesive is tack dry.

Step 6

Apply the laminate to your core board.

Step 7

Apply pressure with a Permagrip laminate roller (do not use hand pressure or wood blocks).

If you would like to see for yourself just how simple it is to correctly spray web adhesives, please take a look at our dedicated video section.

For any other queries, please browse the site or get in touch with a member of our team – we’d be happy to answer any questions you may have.