

Boat Hull
TensorGrip infusion moulding adhesives are designed to unite with the matrix of a fibreglass boat hull, furnishing you with the control to create an end product that’s second to none.
Available Products
TensorGrip - M01 - Polystyrene Plug Build Adhesive
A polyurethane foam bead adhesive, developed to bond large format polystyrene blocks.




TensorGrip - M30 - RTM/ Infusion Moulding Adhesive
Specifically formulated for vacuum infusion molding. It makes for lighter, stronger parts and overcomes problems such as bonding failure, resin blockage and surface defects in the finished product.



TensorGrip - M30 CO-REZ - Low VOC RTM/ Infusion Adhesive
A mist spray adhesive that is low in V.O.C. It is suitable for foam and thin fabric bonding applications as well as fibreglass infusion.




TensorGrip - M31 - HS Infusion/ RTM Mould Spray Adhesive
A high-strength mist spray adhesive suitable for fabric glass bonding applications and for use in fibreglass infusion.





TensorGrip - M55 - Super Tack Infusion Heavy Mat Adhesive
A super tacky and heavy mat spray adhesive.



TensorGrip - M81 - High Temperature Resistant Laminate Spray Adhesive
A high performance contact adhesive which creates a tough resilient bond line between decorative laminate materials and wood substrates.






TensorGrip - M82 - Mould Deck Ultra High Grab Spray Adhesive
Fast drying contact adhesive with good heat resistance, suitable for bonding a variety of materials to sheet timber, metal and some hard plastics.



TensorGrip - M84 - High Tack Multi-Purpose Spray Adhesive
A high tack spray adhesive developed for bonding carpet and thick fabric applications.





