TensorGrip - M30 - Infusion RTM Mould Spray Adhesive

TensorGrip M30 – designed for the Marine infusion mould market this product is a high performance, solvent-based polymer adhesive in a pressurised canister delivery system. TensorGrip M30 is specifically designed to hold reinforcing fibres in place during the infusion process of the resin without affecting the surface finish or structural integrity. Most importantly, TensorGrip M30 does not interfere with the curing process of vinyl esters, polyesters or styrene resins, and ultimately becomes part of the polymer matrix. TensorGrip M30 is a unique system to be used in the moulding process, and is designed specifically to overcome the problems normally associated with using other types of adhesives, such as bonding failure, resin blockage, surface defects in the finished product etc. It can also be used as a general purpose adhesive for a wide range of applications.

  • Safely fuses laminating materials to structural core surfaces
  • Ultimately becomes part of the polymer matrix, allowing resin to obtain maximum tensile strength
  • Very fast application with convenient, reliable, portable spray system
  • Provides superior holding during forming process
  • Will not interfere with the curing process of vinyl esters, polyesters or styrene resin

Developed For:

  • Fiberglass Infusion
  • FRP/GRP

Properties:

  • Mist Spray
Back